FOR A BETTER UNDERSTANDING. SPECIAL TERMS IN THE MARTOR WORLD.


We want you to use our products safely and efficiently. An important prerequisite is to understand us and our cutting tools. For convenient and easy guidance, we have compiled a glossary for you. Here you will find explanations for all the special terms we use.

Adhesive tape splitter

Some of our cutting tools are also equipped with a tape splitter, for example, the SECUMAX 320. This has a reversible metal plate with two different splitting depths.

To Top
Automatic blade retraction

The blade retracts into the handle as soon as it leaves the cutting material. Condition: the slider is not held tight. Safety knives with automatic blade retraction are called SECUNORM …

To Top
Blade access

Blade access in our safety knives with concealed blades determines the gap between handle and nose. It is always narrow enough for your finger not to pass through but also wide enough to be able to work on certain cutting materials. 

To Top
Blade carrier

The blade is positioned on the blade carrier. It is held in place by one or more locating lobes. Some blade carriers are also equipped with a small magnet to provide extra hold to the blade when blade changing.

To Top
Blade category

We call a specific superordinate group of blades a blade category. The designation takes place according to the shape (e.g. trapezoid blade, hooked blade, etc.), area of use (e.g. industrial blade) or function (e.g. scraper blade, deburring blade). 

To Top
Blade change

Most of our cutting tools are re-usable knives. We have made blade changing as easy, safe and comfortable as possible, so that you will not hurt yourself while doing so. And so that no blades get lost while changing them.

To Top
Blade change button

With certain safety knives you can use a blade change button to initiate the blade change.

To Top
Blade cover

The blade cover is the small plate lying on the blade. It holds the blade together with the blade carrier. In many of our cutting tools, you have to lift up the blade cover to change the blade.

To Top
Blade holder

The blade holder holds the blade by ensuring a constant pressed fit. The blade holder usually consists of an upper element (blade cover) and a lower element (blade carrier).

To Top
Blade slot

The blade slot is at the front of the handle. The blade extends outside the handle here and gets back in again. 

To Top
Comfort

The useful properties of a cutting tool, such as its ergonomic shape or the easy and safe blade change increase your comfort when using it.

To Top
Concealed blade

The cutting tool is designed so that the blade is concealed from the outside. This means maximum protection: against cut injuries and damage to the packaged goods. We call safety knives with concealed blades SECUMAX ...

To Top
Cutting channel

The blade access (aperture) describes the area between handle and nose, all the way to the beginning of the cutting edge. However, the contact area determined by the cutting channel goes even further. Example SECUMAX 350: the entire area where cutting material comes into contact with the knife - starting at the entrance gate (aperture) between handle and nose across the blade and up to the plastic head of the knife - is what we call "cutting channel".

To Top
Cutting depth

The cutting depth determines how deep the blade can penetrate into the cutting material.

To Top
Cutting edge

We call the sharpened edge of the blade the cutting edge. We call the far end of the cutting edge the blade tip.

To Top
Cutting material

You use your cutting tool on cutting materials. What the knife cuts particularly well is classified as "main cutting materials". We call "secondary cutting materials" materials that can also be cut with the tool even though the MARTOR knife has not been specially designed for this purpose.

To Top
Cutting solutions

Together, our products, performance and services provide the guarantee for safe cutting solutions. Our solutions are always customised to a specific "cutting problem", e.g. specific cutting work, a certain cutting environment and/or a special cutting material.

To Top
Cutting types

In the type of cut, we describe how or for what users use their cutting tool. Examples are: cutting with tension, cutting under pressure, forceful cut or saw cut. The type of cut can also describe the result of cutting, for example, “window cut“ or “removing the cover“.

To Top
Disposable knife

Changing blades is not possible with our disposable knives. You can just dispose of them through the residual waste system after use.

To Top
Ergonomic shape

If a cutting tool has been designed so that it is especially pleasant to hold, we describe it as having an “ergonomic shape“ or being “ergonomically shaped“.

To Top
Eyelet

The eyelet is located at the end of the handle. It can be used to hang up the knife in a secure place. Pulling a cord through the eyelet enables other ways of attaching the MARTOR knife.

To Top
For right and left handers

If a knife can be used just as well by right and left handers, we highlight it in the form mentioned.

To Top
Fully automatic blade retraction

The blade retracts into the handle as soon as it leaves the cutting material - even if the slider (or lever) is held tight. Safety knives with fully automatic blade retraction are called SECUPRO… 

To Top
Handle

The handle is the main component of our cutting tools. The slider, lever, buttons, etc. can be found on the handle. The blade or the mechanism that pulls back the blade are concealed in the handle.

To Top
Installed blade

The blade normally supplied with the cutting tool is the installed blade. Other blades can however be used. We call these optional blades.

To Top
Lever

The blade in our squeeze-grip knives is not released by a slider but by a lever. You have to operate the lever in the lower handle area for this purpose.

To Top
Material guide

Some safety knives are equipped with a bendable plastic material guide attached to the handle at the blade access area. The material guide's task is to hold down the material being cut and guide it to the blade at an optimum angle to prevent the material jamming.

To Top
Metal detectable

We have designed the product family of MDP knives especially for "sensitive" sectors such as the food and pharmaceutical industries. MDP stands for "metal detectable plastic". If MARTOR knives made of this special high-quality plastic unintentionally enter the production process, they can be detected and filtered out by a company's own detectors. This is an effective way to prevent malfunctions and contamination, even from the tiniest plastic particles.

To Top
Nose

A knife nose is to be found only in our safety knives with a concealed blade. In combination with the handle, the nose securely conceals the blade. The nose is generally pointed enough to make it easy to pierce cutting materials while being rounded enough to prevent injuries.

To Top
Optional blade

You can fit almost all our safety knives with an alternative MARTOR blade according to your requirements. This optional blade can be a hooked blade, for example (instead of the fitted trapezium blade). It can also be stainless steel or TiN-coated. Or it will have rounded tips. Considering the approx. 160 blades in our product range, this is only a small selection of possible variants.

To Top
Plastic insert

Example SECUNORM HANDY: the complete inside art of a cutting tool that you have to pull out for blade change. We call it a plastic insert.

To Top
Product category

We call a specific superordinate group of cutting tools product category. We have three of these: 1. Safety knives, 2. Cutters, 3. Special cutters (scalpels, deburring cutters, scrapers, etc.). 

To Top
Product family

We call a sub-group of cutting tools connecting a certain characteristic a product family. These can also be found in various product categories. Examples are: MDP knives, disposable knives, promotional knives, squeeze-grip knives etc.

To Top
Promotional knives

There is also a promotional knife variant of many of our cutting tools. In other words, without a MARTOR logo but with space for your logo or your claim. A premium give-a-way for your customers, friends and partners with a high user value and a long life.

To Top
Quality blade

All MARTOR blades are quality blades. Still, there are differences here that we communicate specifically, e.g. stainless steel or TiN-coated.

To Top
Safety knives

Although we have other high-quality cutting tools in our product range, safety knives are our core competence. They are called safety knives because they are equipped with reliable safety technology: automatic and fully automatic blade retraction and a concealed blade. By using our safety knives, the number of cut injuries can be significantly reduced.

To Top
Safety level

We differentiate between four safety levels: optional safety (blade retraction and locking), a high degree of safety (automatic blade retraction), a very high degree of safety (fully automatic blade retraction) and maximum safety (concealed blade).

To Top
Safety lock

The safety lock prevents the blade from driving out of the handle unintended. Releasing the blade is usually done with the same element.

To Top
Safety technology

Our safety technologies include manual blade retraction (in non-safety knives only), automatic blade retraction (SECUNORM), fully automatic blade retraction (SECUPRO), concealed blade (SECUMAX) and optional safety (SECUBASE).

To Top
SECUBASE

SECUBASE is our product group name for cutting tools with safety options. SECUBASE safety knives generally feature retracting and fixed blade options which users can choose between.

To Top
SECUMAX

SECUMAX is the name we give to the group of cutting tools that provide maximum levels of work safety. SECUMAX safety knives generally have concealed blades that keep their distance from both users and packaged goods.

To Top
SECUNORM

SECUNORM is the name we give to the group of cutting tools that provide high levels of work safety. SECUNORM safety knives are generally equipped with automatic blade retraction to protect against cut injuries.

To Top
SECUPRO

SECUPRO is the name we give to the group of cutting tools that provide very high levels of work safety. SECUPRO safety knives are generally equipped with fully automatic blade retraction to protect against cut injuries.

To Top
Slider

Most of our safety knives with automatic or fully automatic blade retraction are equipped with a slider. By pushing the slider forward, the blade is brought into its cutting position.

To Top
Sliding base

In some of our safety knives with concealed blade, the handle leads into a sliding base. As the name suggests, the bottom of the base slides smoothly over the surface. At the same time, the cutting material is lead to the blade over the top of the sliding base. 

To Top
Soft grip

We describe the soft plastic layer that makes a handle particularly resistant to slipping a soft grip.

To Top
Squeeze-grip knife

Current examples: SECUPRO 625, SECUPRO MARTEGO, SECUPRO MERAK and SECUNORM MIZAR. All these cutting tools belong to the young product family of innovative squeeze-grip knives. As with tongs, you will find an easily movable lever at the bottom of their handles. You can release the blade very comfortably with it.

To Top
TiN-coated

TiN stands for titanium nitride, a chemical compound comprising titanium and nitrogen. This material is known for its extreme hardness and corrosion resistance. Our TiN-coated blades are therefore subject to less wear and have a longer service life with a constant high-level of sharpness.

To Top
Wall strength

Some of our paper and film cutters are so delicate that we do not talk of "width" when talking about dimensions. Instead, we indicate the wall thickness of the handle, which is 2 or 3 mm, for example - the perfect solution for cutting in narrow slots and narrow spaces in between.

To Top
1-sided ground-edge/2-sided ground-edge

Depending on whether the cutting edge is only sharpened on one side or on both sides, we describe it as 1-sided ground edge or 2-sided ground-edge.

To Top
2-cutting edge/4-cutting edge blade

If you can turn the blade around and use it several times, we call it a 2-cutting or 4-cutting edge blade.

To Top
3-in-1 blade head

Example SECUMAX 150: It has a separate blade head, suitable for three different uses: cutting, scraping, splitting.

To Top
3-in-1 safety lock

Example SECUNORM MIZAR: This squeeze-grip knife has a unique 3-in-1 safety lock. You cannot only lock and unlock the blade with it, but also initiate safe blade change. 

To Top